NHL is a natural lime material and has been used for centauries in construction as mortar for bricks as well an external rendering. The product is vapour permeable (Breathable).

Advantages of Natural Hydraulic Lime system

Protection of building, summer/winter comfort.
Energy saving / retains existing living space.
Several colours: through and through colour and lime wash.
Accommodate small settlement movement

Area of use

New or old buildings:
Domestic or collective/social housing.
Renovation of existing dwellings
Conservation repairs and works

Substrates

New or old substrates in brick, differing masonry elements, substrates coated or not with hydraulic binder mortars render.

Unsuitable Substrates

Saturated or frozen substrates, new masonry under a month old and new concrete with under 45 days’ drying time are excluded. (If in doubt consult EnviroNomix.)

Technical characteristics

Thermal performance of cork
Thickness in mm.        50      100
R=m2.ºK/W               1.25          2.50

REVLANE provides the decorative and protective finish for the thin coat system. A variety of different finishes are available in many different colours.

Advantages of PARISO Thin coat Acrylic system

Protection of building, summer/winter comfort.
Energy saving / retains existing living space.
Several finishes: sand fine, sand coarse, swirl fine, swirl coarse.

Area of use

New or old buildings:
Domestic or collective/social housing.
Administrative and commercial buildings.
Industrial and agricultural buildings.

Substrates

New or old substrates in brick, concrete, aggregate concrete, prefabricated concrete panels, differing masonry elements, substrates coated or not with hydraulic binder mortars render.

Unsuitable Substrates

Saturated or frozen substrates, new masonry under a month old and new concrete with under 45 days’ drying time are excluded. (If in doubt consult EnviroNomix.)

Technical characteristics

Thermal performance of cork
Thickness in mm.       50         100
R=m2.ºK/W                1.25          2.50

EHI is a mineral based mortar that retains the traditional monocouche finish of the façade, provides a traditional appearance and is available in many colours. Manual or mechanical application.

Advantages of Monorex System

• Protection of the structure providing summer/winter comfort and with the insulation externally applied, it avoids the
• loss of the internal living space.
• Energy saving.
• Easy maintenance.
• Retains the original monocouche finish of traditional render.

Area of use

New or old buildings:
• Domestic or collective/social housing.
• Administrative and commercial buildings.
• Industrial and agricultural buildings.

Substrates

New or old substrates in brick, concrete, aggregate concrete, prefabricated concrete panels, differing masonry elements, substrates coated with or without hydraulic binder mortar render.
Unsuitable Substrates
Saturated or frozen substrates, new masonry under a month old and new concrete with under 45 days’ drying time are excluded. (If in doubt consult EnviroNomix.)

Technical characteristics

Thermal performance of cork
Thickness in mm.   50          100
R=m2.ºK/W             1.25        2.50

Please note that this area of the website is currently under construction, the information should be available shortly.

When a rocket ascends through the earth’s atmosphere it is subject to immense aerodynamic heating caused by the friction of the air against the fragile skin of the accelerating vehicle. Instead of running the risk of the heat piercing the skin of the rocket, the original Delta team used the typical engineer’s approach to “killing the problem”, putting in a layer of insulating material.

The insulator they chose was cork. It seemed to me a strange material to use in a launch vehicle. Cork in a spaceship? It was so ninetenth century. It made you think Where’s the gutta-percha? Where’s the beeswax? But cork really made sense if you thought about it. It’s a good insulator, it’s light and it’s cheap. It had worked well in the seventes, and when something really works in rockets, you tend to leave it alone unless you don’t have any choice.

The Delta family of rockets (supplied by the Boeing company) has been in service since August 1960 when Delta I was launched. When the shuttle programme began NASA proposed getting rid of all non-reusable craft, but after the Challenger accident all projects were renewed. In 1989 the new model of Delta rocket was launched, Delta II, designed to launch the satellites which would make up the GPS system. The United States needed bigger launchers for its spy satellites, and so in 1998 Delta III was created and in 2001 Delta IV.

Board dimensions, thickness, packing and coverage per pack:

Board Size – All Formats: 1000mm x 500mm

Cork Dimensions

Please contact us if you have any special requirements.

EnviroCork Corkboard provides high thermal insulation that can be used in many applications as additional insulation or as the main thermal barrier.

Application Methods

• Internal Wall Insulation (Can receive direct plastering, no plasterboard required)
• External Wall Insulation (With or without External Rendering)
• Acoustic Insulation
• Warm-Roof Insulation
• In-Roof Insulation
• Floor Insulation (ontop of or under slab)
• Floor Insulation on top of floorboards
• Light Weight Insulation Screeding System